- Fabrication of Quasi-crystal Strengthened Aluminum Composites by Mechanical Milling Process
-
Woo Jang, Kwang Shin
-
J Korean Powder Metall Inst. 2005;12(3):208-213.
-
DOI: https://doi.org/10.4150/KPMI.2005.12.3.208
-
-
17
View
-
0
Download
-
2
Citations
-
 Abstract
 PDF
- Aluminum matrix composites strengthened by the quasi-crystalline (QC) phase were developed in the present study. The icosahedral Al_65Cu_20Fe_15 phase was produced by gravity casting and subsequent heat treatment. The mechanical milling process was utilized in order to produce the Al/QC composite powders. The microstructures of the composite powders were examined by optical microscopy (OM) and scanning electron microscopy (SEM). The composite powders were subsequently canned, degassed and extruded in order to produce the bulk composite extrusions with various volume fractions of QC. The microstructure and mechanical properties of the extrusions were examined by OM, SEM, Vickers hardness tests and compression tests. It was found that the microstructures of the Al/QC composites were uniform and the mechanical properties could be significantly improved by the addition of the QC phase.
-
Citations
Citations to this article as recorded by  - Grinding Behaviour of Aluminum Powder for Al/CNTs Nano Composites Fabrication by Dry Grinding Process Using a High Speed Planetary Ball Mill
Heekyu Choi, Jehyun Lee, Seongsoo Kim, Gyungpil Choi, Daehyung Bae, Sungbak Lee, Woong Lee
Korean Journal of Materials Research.2013; 23(2): 89. CrossRef - Fabrication of Aluminum/Aluminum Nitride Composites by Reactive Mechanical Alloying
Seung Hoon Yu, Kwang Seon Shin
Materials Science Forum.2007; 534-536: 181. CrossRef
|
kpmi
